Struct westend_runtime::Runtime[−][src]

pub struct Runtime;

Implementations

Trait Implementations

Get current account nonce of given AccountId.

Retrieve authority identifiers of the current and next authority set.

Return the genesis configuration for BABE. The configuration is only read on genesis.

Returns the slot that started the current epoch.

Returns information regarding the current epoch.

Returns information regarding the next epoch (which was already previously announced). Read more

Generates a proof of key ownership for the given authority in the current epoch. An example usage of this module is coupled with the session historical module to prove that a given authority key is tied to a given staking identity during a specific session. Proofs of key ownership are necessary for submitting equivocation reports. NOTE: even though the API takes a slot as parameter the current implementations ignores this parameter and instead relies on this method being called at the correct block height, i.e. any point at which the epoch for the given slot is live on-chain. Future implementations will instead use indexed data through an offchain worker, not requiring older states to be available. Read more

Submits an unsigned extrinsic to report an equivocation. The caller must provide the equivocation proof and a key ownership proof (should be obtained using generate_key_ownership_proof). The extrinsic will be unsigned and should only be accepted for local authorship (not to be broadcast to the network). This method returns None when creation of the extrinsic fails, e.g. if equivocation reporting is disabled for the given runtime (i.e. this method is hardcoded to return None). Only useful in an offchain context. Read more

Return the current active BEEFY validator set

Get the benchmark metadata available for this runtime. Read more

Dispatch the given benchmark.

Apply the given extrinsic. Read more

Finish the current block.

Generate inherent extrinsics. The inherent data will vary from chain to chain.

Check that the inherents are valid. The inherent data will vary from chain to chain.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Handler for withdrawing, refunding and depositing the transaction fee. Transaction fees are withdrawn before the transaction is executed. After the transaction was executed the transaction weight can be adjusted, depending on the used resources by the transaction. If the transaction weight is lower than expected, parts of the transaction fee might be refunded. In the end the fees can be deposited. Read more

The fee to be paid for making a transaction; the per-byte portion.

A fee mulitplier for Operational extrinsics to compute “virtual tip” to boost their priority Read more

Convert a weight value into a deductible fee based on the currency type.

Update the multiplier of the next block, based on the previous block’s weight.

The balance of an account.

Handler for the unbalanced reduction when removing a dust account.

The overarching event type.

The minimum amount required to keep an account open.

The means of storing the balances of an account.

The maximum number of locks that should exist on an account. Not strictly enforced, but used for weight estimation. Read more

The maximum number of named reserves that can exist on an account.

The id type for named reserves.

Weight information for extrinsics in this pallet.

The type of fungible that is being used under the hood. Read more

The account used to check assets being teleported.

A trusted location which we allow teleports from, and the asset we allow to teleport.

Give me a fungible asset that your asset transactor is going to accept.

The basic call filter to use in Origin. All origins are built with this filter as base, except Root. Read more

Block & extrinsics weights: base values and limits.

The maximum length of a block (in bytes).

The Origin type used by dispatchable calls.

The aggregated Call type.

Account index (aka nonce) type. This stores the number of previous transactions associated with a sender account. Read more

The block number type used by the runtime.

The output of the Hashing function.

The hashing system (algorithm) being used in the runtime (e.g. Blake2).

The user account identifier type for the runtime.

Converting trait to take a source type and convert to AccountId. Read more

The block header.

The aggregated event type of the runtime.

Maximum number of block number to block hash mappings to keep (oldest pruned first).

The weight of runtime database operations the runtime can invoke.

Get the chain’s current version.

Provides information about the pallet setup in the runtime. Read more

Data to be associated with an account (other than nonce/transaction counter, which this pallet does regardless). Read more

Handler for when a new account has just been created.

A function that is invoked when an account has been determined to be dead. Read more

The designated SS85 prefix of this chain. Read more

What to do if the runtime wants to change the code to something new. Read more

The outer event type.

An interface for reserving deposits for opening channels. Read more

The aggregate event.

A place where all received upward messages are funneled.

The factor by which the weight limit it multiplied for the first UMP message to execute with. Read more

Origin which is allowed to execute overweight messages.

A randomness beacon.

An origin which is allowed to force updates to parachains.

Weight information for extrinsics in this pallet.

The overarching event type.

The currency type used for bidding.

The parachain registrar type.

The number of blocks over which a single period lasts.

The number of blocks to offset each lease period by.

Weight Information for the Extrinsics in the Pallet

The accuracy used to compute the election:

Something that provides the data for election.

The amount of time, in slots, that each epoch should last. NOTE: Currently it is not possible to change the epoch duration after the chain has started. Attempting to do so will brick block production. Read more

The expected average block time at which BABE should be creating blocks. Since BABE is probabilistic it is not trivial to figure out what the expected average block time should be based on the slot duration and the security parameter c (where 1 - c represents the probability of a slot being empty). Read more

BABE requires some logic to be triggered on every block to query for whether an epoch has ended and to perform the transition to the next epoch. Read more

A way to check whether a given validator is disabled and should not be authoring blocks. Blocks authored by a disabled validator will lead to a panic as part of this module’s initialization. Read more

A system for proving ownership of keys, i.e. that a given key was part of a validator set, needed for validating equivocation reports. Read more

The proof of key ownership, used for validating equivocation reports. The proof must include the session index and validator count of the session at which the equivocation occurred. Read more

The identification of a key owner, used when reporting equivocations.

The equivocation handling subsystem, defines methods to report an offence (after the equivocation has been validated) and for submitting a transaction to report an equivocation (from an offchain context). NOTE: when enabling equivocation handling (i.e. this type isn’t set to ()) you must use this pallet’s ValidateUnsigned in the runtime definition. Read more

Max number of authorities allowed

The overarching event type.

The type representing the leasing system.

The parachain registrar type.

The number of blocks over which an auction may be retroactively ended.

The length of each sample to take during the ending period. Read more

Something that provides randomness in the runtime.

The origin which may initiate auctions.

Weight Information for the Extrinsics in the Pallet

Weight information for extrinsics in this pallet.

Find the author of a block.

The number of blocks back we should accept uncles. This means that we will deal with uncle-parents that are UncleGenerations + 1 before now. Read more

A filter for uncles within a block. This is for implementing further constraints on what uncles can be included, other than their ancestry. Read more

An event handler for authored blocks.

Type used for expressing timestamp.

Something which can be notified when the timestamp is set. Set this to () if not needed. Read more

The minimum period between blocks. Beware that this is different to the expected period that the block production apparatus provides. Your chosen consensus system will generally work with this to determine a sensible block time. e.g. For Aura, it will be double this period on default settings. Read more

Weight information for extrinsics in this pallet.

Full identification of the validator.

A conversion from validator ID to full identification. Read more

The overarching event type.

A stable ID for a validator.

A conversion from account ID to validator ID. Read more

Indicator for when to end the session.

Something that can predict the next session rotation. This should typically come from the same logical unit that provides ShouldEndSession, yet, it gives a best effort estimate. It is helpful to implement EstimateNextNewSession. Read more

Handler for managing new session.

Handler when a session has changed.

The keys.

Weight information for extrinsics in this pallet.

Maximum number of nominations per nominator.

The staking balance.

Time used for computing era duration. Read more

Convert a balance into a number used for election calculation. This must fit into a u64 but is allowed to be sensibly lossy. The u64 is used to communicate with the frame_election_provider_support crate which accepts u64 numbers and does operations in 128. Consequently, the backward convert is used convert the u128s from sp-elections back to a BalanceOf. Read more

Tokens have been minted and are unused for validator-reward. See Era payout. Read more

The overarching event type.

Handler for the unbalanced reduction when slashing a staker.

Handler for the unbalanced increment when rewarding a staker.

Number of sessions per era.

Number of eras that staked funds must remain bonded for.

Number of eras that slashes are deferred by, after computation. Read more

The origin which can cancel a deferred slash. Root can always do this.

Interface for interacting with a session pallet.

The payout for validators and the system for the current era. See Era payout. Read more

The maximum number of nominators rewarded for each validator. Read more

The fraction of the validator set that is safe to be offending. After the threshold is reached a new era will be forced. Read more

Something that can estimate the next session change, accurately or as a best effort guess. Read more

Something that provides the election functionality.

Something that provides the election functionality at genesis.

Something that can provide a sorted list of voters in a somewhat sorted way. The original use case for this was designed with pallet_bags_list::Pallet in mind. If the bags-list is not desired, impls::UseNominatorsMap is likely the desired option. Read more

Weight information for extrinsics in this pallet.

The maximum number of authorities that can be added.

Currency type.

Something that can predict the fee of a call. Used to sensibly distribute rewards.

Duration of the signed phase.

Duration of the unsigned phase.

Maximum number of signed submissions that can be queued. Read more

Base reward for a signed solution

Base deposit for a signed solution.

Per-byte deposit for a signed solution.

Per-weight deposit for a signed solution.

Maximum weight of a signed solution. Read more

Handler for the slashed deposits.

Handler for the rewards.

The minimum amount of improvement to the solution score that defines a solution as “better” (in any phase). Read more

Maximum weight that the miner should consume. Read more

Maximum length (bytes) that the mined solution should consume. Read more

The repeat threshold of the offchain worker. Read more

The priority of the unsigned transaction submitted in the unsigned-phase

Something that will provide the election data.

The solution type.

Configuration for the fallback

OCW election solution miner algorithm implementation.

The configuration of benchmarking.

Origin that can control this pallet. Note that any action taken by this origin (such) as providing an emergency solution is not checked. Thus, it must be a trusted origin. Read more

The weight of the pallet.

The maximum number of voters to put in the snapshot. At the moment, snapshots are only over a single block, but once multi-block elections are introduced they will take place over multiple blocks. Read more

The overarching event type.

Something that provides the weights of ids.

Weight information for extrinsics in this pallet.

The list of thresholds separating the various bags. Read more

The event type of this module.

The function call.

A system for proving ownership of keys, i.e. that a given key was part of a validator set, needed for validating equivocation reports. Read more

The proof of key ownership, used for validating equivocation reports The proof must include the session index and validator count of the session at which the equivocation occurred. Read more

The identification of a key owner, used when reporting equivocations.

The equivocation handling subsystem, defines methods to report an offence (after the equivocation has been validated) and for submitting a transaction to report an equivocation (from an offchain context). NOTE: when enabling equivocation handling (i.e. this type isn’t set to ()) you must use this pallet’s ValidateUnsigned in the runtime definition. Read more

Weights for this pallet.

Max Authorities in use

PalletId for the crowdloan pallet. An appropriate value could be PalletId(*b"py/cfund")

The amount to be held on deposit by the depositor of a crowdloan.

The minimum amount that may be contributed into a crowdloan. Should almost certainly be at least ExistentialDeposit. Read more

Max number of storage keys to remove per extrinsic call.

The parachain registrar type. We just use this to ensure that only the manager of a para is able to start a crowdloan for its slot. Read more

The type representing the auctioning system.

The maximum length for the memo attached to a crowdloan contribution.

Weight Information for the Extrinsics in the Pallet

The identifier type for an authority.

The overarching event type.

A type for retrieving the validators supposed to be online in a session.

A trait that allows us to estimate the current session progress and also the average session length. Read more

A type that gives us the ability to submit unresponsiveness offence reports.

A configuration for base priority of unsigned transactions. Read more

Weight information for extrinsics in this pallet.

The maximum number of keys that can be added.

The maximum number of peers to be stored in ReceivedHeartbeats

The maximum size of the encoding of PeerId and MultiAddr that are coming from the hearbeat Read more

Type used for storing an account’s index; implies the maximum number of accounts the system can hold. Read more

The currency trait.

The deposit needed for reserving an index.

The overarching event type.

Weight information for extrinsics in this pallet.

The overarching event type.

Full identification of the validator.

A handler called for every offence report.

The overarching event type.

The overarching call type.

The caller origin, overarching type of all pallets origins.

Weight information for extrinsics in this pallet.

The overarching event type.

The currency trait.

What to do with slashed funds.

The amount held on deposit for a registered identity

The amount held on deposit per additional field for a registered identity.

The amount held on deposit for a registered subaccount. This should account for the fact that one storage item’s value will increase by the size of an account ID, and there will be another trie item whose value is the size of an account ID plus 32 bytes. Read more

The maximum number of sub-accounts allowed per identified account.

Maximum number of additional fields that may be stored in an ID. Needed to bound the I/O required to access an identity, but can be pretty high. Read more

Maxmimum number of registrars allowed in the system. Needed to bound the complexity of, e.g., updating judgements. Read more

The origin which may add or remove registrars. Root can always do this.

The origin which may forcibly set or remove a name. Root can always do this.

Weight information for extrinsics in this pallet.

The overarching event type.

The overarching call type.

The currency mechanism.

The base amount of currency needed to reserve for creating a recovery configuration. Read more

The amount of currency needed per additional user when creating a recovery configuration. Read more

The maximum amount of friends allowed in a recovery configuration.

The base amount of currency needed to reserve for starting a recovery. Read more

The overarching event type.

The currency trait.

Convert the block number into a balance.

The minimum amount transferred to call vested_transfer.

Weight information for extrinsics in this pallet.

Maximum number of vesting schedules an account may have at a given moment.

The overarching event type.

The aggregated origin which the dispatch will take.

The caller origin, overarching type of all pallets origins.

The aggregated call type.

The maximum weight that may be scheduled per block for any dispatchables of less priority than schedule::HARD_DEADLINE. Read more

Required origin to schedule or cancel calls.

The maximum number of scheduled calls in the queue for a single block. Not strictly enforced, but used for weight estimation. Read more

Weight information for extrinsics in this pallet.

Compare the privileges of origins. Read more

The overarching event type.

A sudo-able call.

The overarching event type.

The overarching call type.

The currency mechanism.

A kind of proxy; specified with the proxy and passed in to the IsProxyable fitler. The instance filter determines whether a given call may be proxied under this type. Read more

The base amount of currency needed to reserve for creating a proxy. Read more

The amount of currency needed per proxy added. Read more

The maximum amount of proxies allowed for a single account.

Weight information for extrinsics in this pallet.

The maximum amount of time-delayed announcements that are allowed to be pending.

The type of hash used for hashing the call.

The base amount of currency needed to reserve for creating an announcement. Read more

The amount of currency needed per announcement made. Read more

The overarching event type.

The aggregated origin type must support the parachains origin. We require that we can infallibly convert between this origin and the system origin, but in reality, they’re the same type, we just can’t express that to the Rust type system without writing a where clause everywhere. Read more

The system’s currency for parathread payment.

Runtime hook for when a parachain and parathread swap.

The deposit to be paid to run a parathread. This should include the cost for storing the genesis head and validation code. Read more

The deposit to be paid per byte stored on chain.

Weight Information for the Extrinsics in the Pallet

The overarching event type.

The overarching call type.

The currency mechanism.

The base amount of currency needed to reserve for creating a multisig execution or to store a dispatch call for later. Read more

The amount of currency needed per unit threshold when creating a multisig execution. Read more

The maximum amount of signatories allowed in the multisig.

Weight information for extrinsics in this pallet.

The overarching event type.

Required origin for sending XCM messages. If successful, it resolves to MultiLocation which exists as an interior location within this chain’s XCM context. Read more

The type used to actually dispatch an XCM to its destination.

Required origin for executing XCM messages, including the teleport functionality. If successful, then it resolves to MultiLocation which exists as an interior location within this chain’s XCM context. Read more

Our XCM filter which messages to be executed using XcmExecutor must pass.

Something to execute an XCM message.

Our XCM filter which messages to be teleported using the dedicated extrinsic must pass.

Our XCM filter which messages to be reserve-transferred using the dedicated extrinsic must pass.

Means of measuring the weight consumed by an XCM message locally.

Means of inverting a location.

The outer Origin type.

The outer Call type.

The latest supported version that we advertise. Generally just set it to pallet_xcm::CurrentXcmVersion. Read more

The XCM configurations. Read more

A converter between a multi-location to a sovereign account.

Does any necessary setup to create a valid destination for XCM messages. Returns that destination’s multi-location to be used in benchmarks. Read more

Weight information for extrinsics in this pallet.

The outer origin type.

Weight information for extrinsics in this pallet.

Returns the version of the runtime.

Execute the given block.

Initialize a block with the given header.

Submits a transaction with the node’s public and signature type. Adheres to the signed extension format of the chain.

Attempt to create signed extrinsic data that encodes call from given account. Read more

Formats the value using the given formatter. Read more

Ensure the position of inherent is correct, i.e. they are before non-inherents. Read more

The NodeBlock type.

The RuntimeBlock type.

Get the current GRANDPA authorities and weights. This should not change except for when changes are scheduled and the corresponding delay has passed. Read more

Get current GRANDPA authority set id.

Submits an unsigned extrinsic to report an equivocation. The caller must provide the equivocation proof and a key ownership proof (should be obtained using generate_key_ownership_proof). The extrinsic will be unsigned and should only be accepted for local authorship (not to be broadcast to the network). This method returns None when creation of the extrinsic fails, e.g. if equivocation reporting is disabled for the given runtime (i.e. this method is hardcoded to return None). Only useful in an offchain context. Read more

Generates a proof of key ownership for the given authority in the given set. An example usage of this module is coupled with the session historical module to prove that a given authority key is tied to a given staking identity during a specific session. Proofs of key ownership are necessary for submitting equivocation reports. NOTE: even though the API takes a set_id as parameter the current implementations ignore this parameter and instead rely on this method being called at the correct block height, i.e. any point at which the given set id is live on-chain. Future implementations will instead use indexed data through an offchain worker, not requiring older states to be available. Read more

Returns the metadata of a runtime.

Generate MMR proof for a leaf under given index.

Verify MMR proof against on-chain MMR. Read more

Verify MMR proof against given root hash. Read more

Starts the off-chain task for given block header.

Get the current validators.

Returns the validator groups and rotation info localized based on the hypothetical child of a block whose state this is invoked on. Note that now in the GroupRotationInfo should be the successor of the number of the block. Read more

Yields information on all availability cores as relevant to the child block. Cores are either free or occupied. Free cores can have paras assigned to them. Read more

Yields the persisted validation data for the given ParaId along with an assumption that should be used if the para currently occupies a core. Read more

Returns the persisted validation data for the given ParaId along with the corresponding validation code hash. Instead of accepting assumption about the para, matches the validation data hash against an expected one and yields None if they’re not equal. Read more

Checks if the given validation outputs pass the acceptance criteria.

Returns the session index expected at a child of the block. Read more

Fetch the validation code used by a para, making the given OccupiedCoreAssumption. Read more

Get the receipt of a candidate pending availability. This returns Some for any paras assigned to occupied cores in availability_cores and None otherwise. Read more

Get a vector of events concerning candidates that occurred within a block.

Get the session info for the given session, if stored.

Get all the pending inbound messages in the downward message queue for a para.

Get the contents of all channels addressed to the given recipient. Channels that have no messages in them are also included. Read more

Get the validation code from its hash.

Scrape dispute relevant from on-chain, backing votes and resolved disputes.

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

The runtime’s call type. Read more

The extrinsic type expected by the runtime.

Generate a set of session keys with optionally using the given seed. The keys should be stored within the keystore exposed via runtime externalities. Read more

Decode the given public session keys. Read more

A public key that is capable of identifying AccountIds. Read more

A matching Signature type.

Validate the transaction. Read more

The type identifying for which type info is provided. Read more

Returns the static type identifier for Self.

The call to validate

Validate the call right before dispatch. Read more

Return the validity of the call Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Retrieve authority identifiers of the current authority set in canonical ordering.

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Convert from a value of T into an equivalent instance of Option<Self>. Read more

Consume self to return Some equivalent value of Option<T>. Read more

Converts self into T using Into<T>. Read more

Converts self into a target type. Read more

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

[src]

pub fn __clone_box(&self, Private) -> *mut ()

Compare self to key and return true if they are equal.

Causes self to use its Binary implementation when Debug-formatted.

Causes self to use its Display implementation when Debug-formatted. Read more

Causes self to use its LowerExp implementation when Debug-formatted. Read more

Causes self to use its LowerHex implementation when Debug-formatted. Read more

Causes self to use its Octal implementation when Debug-formatted.

Causes self to use its Pointer implementation when Debug-formatted. Read more

Causes self to use its UpperExp implementation when Debug-formatted. Read more

Causes self to use its UpperHex implementation when Debug-formatted. Read more

Performs the conversion.

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Performs the conversion.

Cast reference.

Cast reference.

Cast mutable reference.

Cast mutable reference.

Get a reference to the inner from the outer.

Get a mutable reference to the inner from the outer.

Pipes by value. This is generally the method you want to use. Read more

Borrows self and passes that borrow into the pipe function. Read more

Mutably borrows self and passes that borrow into the pipe function. Read more

Borrows self, then passes self.borrow() into the pipe function. Read more

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

Borrows self, then passes self.as_ref() into the pipe function.

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

Borrows self, then passes self.deref() into the pipe function.

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

Should always be Self

Convert from a value of T into an equivalent instance of Self. Read more

Consume self to return an equivalent value of T. Read more

Performance hack: Clone doesn’t get inlined for Copy types in debug mode, so make it inline anyway.

Tests if Self the same as the type T Read more

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

Checks if self is actually part of its subset T (and can be converted to it).

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

The inclusion map: converts self to the equivalent element of its superset.

Immutable access to a value. Read more

Mutable access to a value. Read more

Immutable access to the Borrow<B> of a value. Read more

Mutable access to the BorrowMut<B> of a value. Read more

Immutable access to the AsRef<R> view of a value. Read more

Mutable access to the AsMut<R> view of a value. Read more

Immutable access to the Deref::Target of a value. Read more

Mutable access to the Deref::Target of a value. Read more

Calls .tap() only in debug builds, and is erased in release builds.

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

Provides immutable access for inspection. Read more

Calls tap in debug builds, and does nothing in release builds.

Provides mutable access for modification. Read more

Calls tap_mut in debug builds, and does nothing in release builds.

Provides immutable access to the reference for inspection.

Calls tap_ref in debug builds, and does nothing in release builds.

Provides mutable access to the reference for modification.

Calls tap_ref_mut in debug builds, and does nothing in release builds.

Provides immutable access to the borrow for inspection. Read more

Calls tap_borrow in debug builds, and does nothing in release builds.

Provides mutable access to the borrow for modification.

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

Immutably dereferences self for inspection.

Calls tap_deref in debug builds, and does nothing in release builds.

Mutably dereferences self for modification.

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

Attempts to convert self into T using TryInto<T>. Read more

Attempts to convert self into a target type. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The counterpart to unchecked_from.

Consume self to return an equivalent value of T.

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more