Struct pallet_identity::pallet::Pallet[−][src]

pub struct Pallet<T>(_);
Expand description

The pallet implementing the on-chain logic.

Implementations

Identity pallet declaration.

Add a registrar to the system.

The dispatch origin for this call must be T::RegistrarOrigin.

  • account: the account of the registrar.

Emits RegistrarAdded if successful.

  • O(R) where R registrar-count (governance-bounded and code-bounded).
  • One storage mutation (codec O(R)).
  • One event.

Set an account’s identity information and reserve the appropriate deposit.

If the account already has identity information, the deposit is taken as part payment for the new deposit.

The dispatch origin for this call must be Signed.

  • info: The identity information.

Emits IdentitySet if successful.

  • O(X + X' + R)
    • where X additional-field-count (deposit-bounded and code-bounded)
    • where R judgements-count (registrar-count-bounded)
  • One balance reserve operation.
  • One storage mutation (codec-read O(X' + R), codec-write O(X + R)).
  • One event.

Set the sub-accounts of the sender.

Payment: Any aggregate balance reserved by previous set_subs calls will be returned and an amount SubAccountDeposit will be reserved for each item in subs.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • subs: The identity’s (new) sub-accounts.
  • O(P + S)
    • where P old-subs-count (hard- and deposit-bounded).
    • where S subs-count (hard- and deposit-bounded).
  • At most one balance operations.
  • DB:
    • P + S storage mutations (codec complexity O(1))
    • One storage read (codec complexity O(P)).
    • One storage write (codec complexity O(S)).
    • One storage-exists (IdentityOf::contains_key).

Clear an account’s identity info and all sub-accounts and return all deposits.

Payment: All reserved balances on the account are returned.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

Emits IdentityCleared if successful.

  • O(R + S + X)
    • where R registrar-count (governance-bounded).
    • where S subs-count (hard- and deposit-bounded).
    • where X additional-field-count (deposit-bounded and code-bounded).
  • One balance-unreserve operation.
  • 2 storage reads and S + 2 storage deletions.
  • One event.

Request a judgement from a registrar.

Payment: At most max_fee will be reserved for payment to the registrar if judgement given.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • reg_index: The index of the registrar whose judgement is requested.
  • max_fee: The maximum fee that may be paid. This should just be auto-populated as:
Self::registrars().get(reg_index).unwrap().fee

Emits JudgementRequested if successful.

  • O(R + X).
  • One balance-reserve operation.
  • Storage: 1 read O(R), 1 mutate O(X + R).
  • One event.

Cancel a previous request.

Payment: A previously reserved deposit is returned on success.

The dispatch origin for this call must be Signed and the sender must have a registered identity.

  • reg_index: The index of the registrar whose judgement is no longer requested.

Emits JudgementUnrequested if successful.

  • O(R + X).
  • One balance-reserve operation.
  • One storage mutation O(R + X).
  • One event

Set the fee required for a judgement to be requested from a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • fee: the new fee.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 7.315 + R * 0.329 µs (min squares analysis)

Change the account associated with a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • new: the new account ID.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 8.823 + R * 0.32 µs (min squares analysis)

Set the field information for a registrar.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is index.

  • index: the index of the registrar whose fee is to be set.
  • fields: the fields that the registrar concerns themselves with.
  • O(R).
  • One storage mutation O(R).
  • Benchmark: 7.464 + R * 0.325 µs (min squares analysis)

Provide a judgement for an account’s identity.

The dispatch origin for this call must be Signed and the sender must be the account of the registrar whose index is reg_index.

  • reg_index: the index of the registrar whose judgement is being made.
  • target: the account whose identity the judgement is upon. This must be an account with a registered identity.
  • judgement: the judgement of the registrar of index reg_index about target.

Emits JudgementGiven if successful.

  • O(R + X).
  • One balance-transfer operation.
  • Up to one account-lookup operation.
  • Storage: 1 read O(R), 1 mutate O(R + X).
  • One event.

Remove an account’s identity and sub-account information and slash the deposits.

Payment: Reserved balances from set_subs and set_identity are slashed and handled by Slash. Verification request deposits are not returned; they should be cancelled manually using cancel_request.

The dispatch origin for this call must match T::ForceOrigin.

  • target: the account whose identity the judgement is upon. This must be an account with a registered identity.

Emits IdentityKilled if successful.

  • O(R + S + X).
  • One balance-reserve operation.
  • S + 2 storage mutations.
  • One event.

Add the given account to the sender’s subs.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

Alter the associated name of the given sub-account.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

Remove the given account from the sender’s subs.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender.

The dispatch origin for this call must be Signed and the sender must have a registered sub identity of sub.

Remove the sender as a sub-account.

Payment: Balance reserved by a previous set_subs call for one sub will be repatriated to the sender (not the original depositor).

The dispatch origin for this call must be Signed and the sender must have a registered super-identity.

NOTE: This should not normally be used, but is provided in the case that the non- controller of an account is maliciously registered as a sub-account.

Information that is pertinent to identify the entity behind an account.

TWOX-NOTE: OK ― AccountId is a secure hash.

The super-identity of an alternative “sub” identity together with its name, within that context. If the account is not some other account’s sub-identity, then just None.

Alternative “sub” identities of this account.

The first item is the deposit, the second is a vector of the accounts.

TWOX-NOTE: OK ― AccountId is a secure hash.

The set of registrars. Not expected to get very big as can only be added through a special origin (likely a council motion).

The index into this can be cast to RegistrarIndex to get a valid value.

Get the subs of an account.

Trait Implementations

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”. Read more

Run the benchmarks for this pallet.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Returns the current storage version as supported by the pallet.

Returns the on-chain storage version of the pallet as stored in the storage.

The block is being finalized. Implement to have something happen.

This will be run when the block is being finalized (before on_finalize). Implement to have something happen using the remaining weight. Will not fire if the remaining weight is 0. Return the weight used, the hook will subtract it from current weight used and pass the result to the next on_idle hook if it exists. Read more

The block is being initialized. Implement to have something happen. Read more

Perform a module upgrade. Read more

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain. Read more

Run integrity test. Read more

Run integrity test. Read more

This function is being called after every block import (when fully synced). Read more

The block is being finalized. Implement to have something happen. Read more

Something that should happen at genesis.

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation. Read more

The block is being initialized. Implement to have something happen. Read more

Perform a module upgrade. Read more

Index of the pallet as configured in the runtime.

Name of the pallet as configured in the runtime.

Name of the Rust module containing the pallet.

Version of the crate containing the pallet.

The number of pallets’ information that this type represents. Read more

Extend the given vector by all of the pallets’ information that this type represents. Read more

All of the pallets’ information that this type represents.

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Convert from a value of T into an equivalent instance of Option<Self>. Read more

Consume self to return Some equivalent value of Option<T>. Read more

Converts self into T using Into<T>. Read more

Converts self into a target type. Read more

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

[src]

pub fn __clone_box(&self, Private) -> *mut ()

Compare self to key and return true if they are equal.

Causes self to use its Binary implementation when Debug-formatted.

Causes self to use its Display implementation when Debug-formatted. Read more

Causes self to use its LowerExp implementation when Debug-formatted. Read more

Causes self to use its LowerHex implementation when Debug-formatted. Read more

Causes self to use its Octal implementation when Debug-formatted.

Causes self to use its Pointer implementation when Debug-formatted. Read more

Causes self to use its UpperExp implementation when Debug-formatted. Read more

Causes self to use its UpperHex implementation when Debug-formatted. Read more

Performs the conversion.

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Performs the conversion.

Cast reference.

Cast reference.

Cast mutable reference.

Cast mutable reference.

Get a reference to the inner from the outer.

Get a mutable reference to the inner from the outer.

Pipes by value. This is generally the method you want to use. Read more

Borrows self and passes that borrow into the pipe function. Read more

Mutably borrows self and passes that borrow into the pipe function. Read more

Borrows self, then passes self.borrow() into the pipe function. Read more

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

Borrows self, then passes self.as_ref() into the pipe function.

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

Borrows self, then passes self.deref() into the pipe function.

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

Should always be Self

Convert from a value of T into an equivalent instance of Self. Read more

Consume self to return an equivalent value of T. Read more

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

Checks if self is actually part of its subset T (and can be converted to it).

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

The inclusion map: converts self to the equivalent element of its superset.

Immutable access to a value. Read more

Mutable access to a value. Read more

Immutable access to the Borrow<B> of a value. Read more

Mutable access to the BorrowMut<B> of a value. Read more

Immutable access to the AsRef<R> view of a value. Read more

Mutable access to the AsMut<R> view of a value. Read more

Immutable access to the Deref::Target of a value. Read more

Mutable access to the Deref::Target of a value. Read more

Calls .tap() only in debug builds, and is erased in release builds.

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

Provides immutable access for inspection. Read more

Calls tap in debug builds, and does nothing in release builds.

Provides mutable access for modification. Read more

Calls tap_mut in debug builds, and does nothing in release builds.

Provides immutable access to the reference for inspection.

Calls tap_ref in debug builds, and does nothing in release builds.

Provides mutable access to the reference for modification.

Calls tap_ref_mut in debug builds, and does nothing in release builds.

Provides immutable access to the borrow for inspection. Read more

Calls tap_borrow in debug builds, and does nothing in release builds.

Provides mutable access to the borrow for modification.

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

Immutably dereferences self for inspection.

Calls tap_deref in debug builds, and does nothing in release builds.

Mutably dereferences self for modification.

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

Attempts to convert self into T using TryInto<T>. Read more

Attempts to convert self into a target type. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The counterpart to unchecked_from.

Consume self to return an equivalent value of T.

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more