Enum pallet_elections_phragmen::pallet::Call[][src]

pub enum Call<T: Config> {
    vote {
        votes: Vec<T::AccountId>,
        value: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance,
    },
    remove_voter {},
    submit_candidacy {
        candidate_count: u32,
    },
    renounce_candidacy {
        renouncing: Renouncing,
    },
    remove_member {
        who: <T::Lookup as StaticLookup>::Source,
        has_replacement: bool,
    },
    clean_defunct_voters {
        num_voters: u32,
        num_defunct: u32,
    },
    // some variants omitted
}
Expand description

Contains one variant per dispatchable that can be called by an extrinsic.

Variants

vote

Vote for a set of candidates for the upcoming round of election. This can be called to set the initial votes, or update already existing votes.

Upon initial voting, value units of who’s balance is locked and a deposit amount is reserved. The deposit is based on the number of votes and can be updated over time.

The votes should:

If value is more than who’s total balance, then the maximum of the two is used.

The dispatch origin of this call must be signed.

Warning

It is the responsibility of the caller to NOT place all of their balance into the lock and keep some for further operations.

We assume the maximum weight among all 3 cases: vote_equal, vote_more and vote_less.

Fields of vote

votes: Vec<T::AccountId>value: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance
remove_voter

Remove origin as a voter.

This removes the lock and returns the deposit.

The dispatch origin of this call must be signed and be a voter.

Fields of remove_voter

submit_candidacy

Submit oneself for candidacy. A fixed amount of deposit is recorded.

All candidates are wiped at the end of the term. They either become a member/runner-up, or leave the system while their deposit is slashed.

The dispatch origin of this call must be signed.

Warning

Even if a candidate ends up being a member, they must call Call::renounce_candidacy to get their deposit back. Losing the spot in an election will always lead to a slash.

The number of current candidates must be provided as witness data.

Fields of submit_candidacy

candidate_count: u32
renounce_candidacy

Renounce one’s intention to be a candidate for the next election round. 3 potential outcomes exist:

The dispatch origin of this call must be signed, and have one of the above roles.

The type of renouncing must be provided as witness data.

Fields of renounce_candidacy

renouncing: Renouncing
remove_member

Remove a particular member from the set. This is effective immediately and the bond of the outgoing member is slashed.

If a runner-up is available, then the best runner-up will be removed and replaces the outgoing member. Otherwise, a new phragmen election is started.

The dispatch origin of this call must be root.

Note that this does not affect the designated block number of the next election.

If we have a replacement, we use a small weight. Else, since this is a root call and will go into phragmen, we assume full block for now.

Fields of remove_member

who: <T::Lookup as StaticLookup>::Sourcehas_replacement: bool
clean_defunct_voters

Clean all voters who are defunct (i.e. they do not serve any purpose at all). The deposit of the removed voters are returned.

This is an root function to be used only for cleaning the state.

The dispatch origin of this call must be root.

The total number of voters and those that are defunct must be provided as witness data.

Fields of clean_defunct_voters

num_voters: u32num_defunct: u32

Implementations

Create a call with the variant vote.

Create a call with the variant remove_voter.

Create a call with the variant submit_candidacy.

Create a call with the variant renounce_candidacy.

Create a call with the variant remove_member.

Create a call with the variant clean_defunct_voters.

Trait Implementations

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Attempt to deserialise the value from input.

Attempt to skip the encoded value from input. Read more

Returns the fixed encoded size of the type. Read more

Convert self to a slice and append it to the destination.

If possible give a hint of expected size of the encoding. Read more

Convert self to an owned vector.

Convert self to a slice and then invoke the given closure with it.

Calculates the encoded size. Read more

Return the function name of the Call.

Return all function names.

Return a DispatchInfo, containing relevant information of this dispatch. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

The type identifying for which type info is provided. Read more

Returns the static type identifier for Self.

The origin type of the runtime, (i.e. frame_system::Config::Origin).

Dispatch this call but do not check the filter in origin.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Convert from a value of T into an equivalent instance of Option<Self>. Read more

Consume self to return Some equivalent value of Option<T>. Read more

Converts self into T using Into<T>. Read more

Converts self into a target type. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and advance input by the number of bytes consumed. Read more

Decode Self with the given maximum recursion depth. Read more

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

Compare self to key and return true if they are equal.

Causes self to use its Binary implementation when Debug-formatted.

Causes self to use its Display implementation when Debug-formatted. Read more

Causes self to use its LowerExp implementation when Debug-formatted. Read more

Causes self to use its LowerHex implementation when Debug-formatted. Read more

Causes self to use its Octal implementation when Debug-formatted.

Causes self to use its Pointer implementation when Debug-formatted. Read more

Causes self to use its UpperExp implementation when Debug-formatted. Read more

Causes self to use its UpperHex implementation when Debug-formatted. Read more

Performs the conversion.

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Performs the conversion.

Cast reference.

Cast reference.

Cast mutable reference.

Cast mutable reference.

Get a reference to the inner from the outer.

Get a mutable reference to the inner from the outer.

Return an encoding of Self prepended by given slice.

Pipes by value. This is generally the method you want to use. Read more

Borrows self and passes that borrow into the pipe function. Read more

Mutably borrows self and passes that borrow into the pipe function. Read more

Borrows self, then passes self.borrow() into the pipe function. Read more

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

Borrows self, then passes self.as_ref() into the pipe function.

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

Borrows self, then passes self.deref() into the pipe function.

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

Should always be Self

Convert from a value of T into an equivalent instance of Self. Read more

Consume self to return an equivalent value of T. Read more

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

Checks if self is actually part of its subset T (and can be converted to it).

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

The inclusion map: converts self to the equivalent element of its superset.

Immutable access to a value. Read more

Mutable access to a value. Read more

Immutable access to the Borrow<B> of a value. Read more

Mutable access to the BorrowMut<B> of a value. Read more

Immutable access to the AsRef<R> view of a value. Read more

Mutable access to the AsMut<R> view of a value. Read more

Immutable access to the Deref::Target of a value. Read more

Mutable access to the Deref::Target of a value. Read more

Calls .tap() only in debug builds, and is erased in release builds.

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

Provides immutable access for inspection. Read more

Calls tap in debug builds, and does nothing in release builds.

Provides mutable access for modification. Read more

Calls tap_mut in debug builds, and does nothing in release builds.

Provides immutable access to the reference for inspection.

Calls tap_ref in debug builds, and does nothing in release builds.

Provides mutable access to the reference for modification.

Calls tap_ref_mut in debug builds, and does nothing in release builds.

Provides immutable access to the borrow for inspection. Read more

Calls tap_borrow in debug builds, and does nothing in release builds.

Provides mutable access to the borrow for modification.

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

Immutably dereferences self for inspection.

Calls tap_deref in debug builds, and does nothing in release builds.

Mutably dereferences self for modification.

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

Attempts to convert self into T using TryInto<T>. Read more

Attempts to convert self into a target type. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The counterpart to unchecked_from.

Consume self to return an equivalent value of T.

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more