Struct pallet_bounties::pallet::Pallet [−][src]
pub struct Pallet<T>(_);Expand description
The pallet implementing the on-chain logic.
Implementations
pub fn propose_bounty(
origin: OriginFor<T>,
value: BalanceOf<T>,
description: Vec<u8>
) -> DispatchResult
pub fn propose_bounty(
origin: OriginFor<T>,
value: BalanceOf<T>,
description: Vec<u8>
) -> DispatchResult
Propose a new bounty.
The dispatch origin for this call must be Signed.
Payment: TipReportDepositBase will be reserved from the origin account, as well as
DataDepositPerByte for each byte in reason. It will be unreserved upon approval,
or slashed when rejected.
curator: The curator account whom will manage this bounty.fee: The curator fee.value: The total payment amount of this bounty, curator fee included.description: The description of this bounty.
pub fn propose_curator(
origin: OriginFor<T>,
bounty_id: BountyIndex,
curator: <T::Lookup as StaticLookup>::Source,
fee: BalanceOf<T>
) -> DispatchResult
pub fn propose_curator(
origin: OriginFor<T>,
bounty_id: BountyIndex,
curator: <T::Lookup as StaticLookup>::Source,
fee: BalanceOf<T>
) -> DispatchResult
Unassign curator from a bounty.
This function can only be called by the RejectOrigin a signed origin.
If this function is called by the RejectOrigin, we assume that the curator is
malicious or inactive. As a result, we will slash the curator when possible.
If the origin is the curator, we take this as a sign they are unable to do their job and they willingly give up. We could slash them, but for now we allow them to recover their deposit and exit without issue. (We may want to change this if it is abused.)
Finally, the origin can be anyone if and only if the curator is “inactive”. This allows anyone in the community to call out that a curator is not doing their due diligence, and we should pick a new curator. In this case the curator should also be slashed.
- O(1).
pub fn award_bounty(
origin: OriginFor<T>,
bounty_id: BountyIndex,
beneficiary: <T::Lookup as StaticLookup>::Source
) -> DispatchResult
pub fn award_bounty(
origin: OriginFor<T>,
bounty_id: BountyIndex,
beneficiary: <T::Lookup as StaticLookup>::Source
) -> DispatchResult
pub fn close_bounty(
origin: OriginFor<T>,
bounty_id: BountyIndex
) -> DispatchResultWithPostInfo
pub fn close_bounty(
origin: OriginFor<T>,
bounty_id: BountyIndex
) -> DispatchResultWithPostInfo
pub fn extend_bounty_expiry(
origin: OriginFor<T>,
bounty_id: BountyIndex,
_remark: Vec<u8>
) -> DispatchResult
pub fn extend_bounty_expiry(
origin: OriginFor<T>,
bounty_id: BountyIndex,
_remark: Vec<u8>
) -> DispatchResult
Number of bounty proposals that have been made.
pub fn bounties<KArg>(
k: KArg
) -> Option<Bounty<T::AccountId, BalanceOf<T>, T::BlockNumber>> where
KArg: EncodeLike<BountyIndex>,
pub fn bounties<KArg>(
k: KArg
) -> Option<Bounty<T::AccountId, BalanceOf<T>, T::BlockNumber>> where
KArg: EncodeLike<BountyIndex>,
Bounties that have been made.
pub fn bounty_descriptions<KArg>(k: KArg) -> Option<Vec<u8>> where
KArg: EncodeLike<BountyIndex>,
pub fn bounty_descriptions<KArg>(k: KArg) -> Option<Vec<u8>> where
KArg: EncodeLike<BountyIndex>,
The description of each bounty.
Bounty indices that have been approved but not yet funded.
The account ID of the treasury pot.
This actually does computation. If you need to keep using it, then make sure you cache the value and only call this once.
The account ID of a bounty account
Trait Implementations
Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”. Read more
fn run_benchmark(
extrinsic: &[u8],
c: &[(BenchmarkParameter, u32)],
whitelist: &[TrackedStorageKey],
verify: bool,
internal_repeats: u32
) -> Result<Vec<BenchmarkResult>, BenchmarkError>
fn run_benchmark(
extrinsic: &[u8],
c: &[(BenchmarkParameter, u32)],
whitelist: &[TrackedStorageKey],
verify: bool,
internal_repeats: u32
) -> Result<Vec<BenchmarkResult>, BenchmarkError>
Run the benchmarks for this pallet.
Returns the current storage version as supported by the pallet.
Returns the on-chain storage version of the pallet as stored in the storage.
The block is being finalized. Implement to have something happen.
This will be run when the block is being finalized (before on_finalize).
Implement to have something happen using the remaining weight.
Will not fire if the remaining weight is 0.
Return the weight used, the hook will subtract it from current weight used
and pass the result to the next on_idle hook if it exists. Read more
The block is being initialized. Implement to have something happen. Read more
Perform a module upgrade. Read more
Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain. Read more
Run integrity test. Read more
Run integrity test. Read more
This function is being called after every block import (when fully synced). Read more
The block is being finalized. Implement to have something happen. Read more
Something that should happen at genesis.
The block is being finalized.
Implement to have something happen in case there is leftover weight.
Check the passed remaining_weight to make sure it is high enough to allow for
your pallet’s extra computation. Read more
The block is being initialized. Implement to have something happen. Read more
Perform a module upgrade. Read more
Name of the Rust module containing the pallet.
Version of the crate containing the pallet.
Extend the given vector by all of the pallets’ information that this type represents. Read more
All of the pallets’ information that this type represents.
fn spend_funds(
budget_remaining: &mut BalanceOf<T>,
imbalance: &mut PositiveImbalanceOf<T>,
total_weight: &mut Weight,
missed_any: &mut bool
)
Auto Trait Implementations
impl<T> RefUnwindSafe for Pallet<T> where
T: RefUnwindSafe,
impl<T> UnwindSafe for Pallet<T> where
T: UnwindSafe,
Blanket Implementations
Mutably borrows from an owned value. Read more
Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more
Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more
Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s. Read more
Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s. Read more
Compare self to key and return true if they are equal.
Causes self to use its Binary implementation when Debug-formatted.
Causes self to use its Display implementation when
Debug-formatted. Read more
Causes self to use its LowerExp implementation when
Debug-formatted. Read more
Causes self to use its LowerHex implementation when
Debug-formatted. Read more
Causes self to use its Octal implementation when Debug-formatted.
Causes self to use its Pointer implementation when
Debug-formatted. Read more
Causes self to use its UpperExp implementation when
Debug-formatted. Read more
Causes self to use its UpperHex implementation when
Debug-formatted. Read more
impl<T> PalletVersionToStorageVersionHelper for T where
T: GetStorageVersion + PalletInfoAccess,
impl<T> PalletVersionToStorageVersionHelper for T where
T: GetStorageVersion + PalletInfoAccess,
Pipes by value. This is generally the method you want to use. Read more
Borrows self and passes that borrow into the pipe function. Read more
Mutably borrows self and passes that borrow into the pipe function. Read more
Borrows self, then passes self.borrow() into the pipe function. Read more
Mutably borrows self, then passes self.borrow_mut() into the pipe
function. Read more
Borrows self, then passes self.as_ref() into the pipe function.
Mutably borrows self, then passes self.as_mut() into the pipe
function. Read more
Borrows self, then passes self.deref() into the pipe function.
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
The inverse inclusion map: attempts to construct self from the equivalent element of its
superset. Read more
Checks if self is actually part of its subset T (and can be converted to it).
Use with care! Same as self.to_subset but without any property checks. Always succeeds.
The inclusion map: converts self to the equivalent element of its superset.
Immutable access to the Borrow<B> of a value. Read more
Mutable access to the BorrowMut<B> of a value. Read more
Immutable access to the AsRef<R> view of a value. Read more
Mutable access to the AsMut<R> view of a value. Read more
Immutable access to the Deref::Target of a value. Read more
Mutable access to the Deref::Target of a value. Read more
Calls .tap() only in debug builds, and is erased in release builds.
Calls .tap_mut() only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow() only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow_mut() only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref() only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref_mut() only in debug builds, and is erased in release
builds. Read more
Calls .tap_deref() only in debug builds, and is erased in release
builds. Read more
Provides immutable access to the reference for inspection.
Calls tap_ref in debug builds, and does nothing in release builds.
Provides mutable access to the reference for modification.
Calls tap_ref_mut in debug builds, and does nothing in release builds.
Provides immutable access to the borrow for inspection. Read more
Calls tap_borrow in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
Immutably dereferences self for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self for modification.
The counterpart to unchecked_from.
Consume self to return an equivalent value of T.
Attaches the provided Subscriber to this type, returning a
WithDispatch wrapper. Read more
Attaches the current default Subscriber to this type, returning a
WithDispatch wrapper. Read more