Enum orml_xtokens::module::Call [−][src]
pub enum Call<T: Config> {
transfer {
currency_id: T::CurrencyId,
amount: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight,
},
transfer_multiasset {
asset: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight,
},
transfer_with_fee {
currency_id: T::CurrencyId,
amount: T::Balance,
fee: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight,
},
transfer_multiasset_with_fee {
asset: Box<VersionedMultiAsset>,
fee: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight,
},
// some variants omitted
}
Expand description
Contains one variant per dispatchable that can be called by an extrinsic.
Variants
Transfer native currencies.
dest_weight
is the weight for XCM execution on the dest chain, and
it would be charged from the transferred assets. If set below
requirements, the execution may fail and assets wouldn’t be
received.
It’s a no-op if any error on local XCM execution or message sending. Note sending assets out per se doesn’t guarantee they would be received. Receiving depends on if the XCM message could be delivered by the network, and if the receiving chain would handle messages correctly.
Fields of transfer
Transfer MultiAsset
.
dest_weight
is the weight for XCM execution on the dest chain, and
it would be charged from the transferred assets. If set below
requirements, the execution may fail and assets wouldn’t be
received.
It’s a no-op if any error on local XCM execution or message sending. Note sending assets out per se doesn’t guarantee they would be received. Receiving depends on if the XCM message could be delivered by the network, and if the receiving chain would handle messages correctly.
Fields of transfer_multiasset
Transfer native currencies specifying the fee and amount as separate.
dest_weight
is the weight for XCM execution on the dest chain, and
it would be charged from the transferred assets. If set below
requirements, the execution may fail and assets wouldn’t be
received.
fee
is the amount to be spent to pay for execution in destination
chain. Both fee and amount will be subtracted form the callers
balance.
If fee
is not high enough to cover for the execution costs in the
destination chain, then the assets will be trapped in the
destination chain
It’s a no-op if any error on local XCM execution or message sending. Note sending assets out per se doesn’t guarantee they would be received. Receiving depends on if the XCM message could be delivered by the network, and if the receiving chain would handle messages correctly.
Fields of transfer_with_fee
currency_id: T::CurrencyId
amount: T::Balance
fee: T::Balance
dest: Box<VersionedMultiLocation>
dest_weight: Weight
Transfer MultiAsset
specifying the fee and amount as separate.
dest_weight
is the weight for XCM execution on the dest chain, and
it would be charged from the transferred assets. If set below
requirements, the execution may fail and assets wouldn’t be
received.
fee
is the multiasset to be spent to pay for execution in
destination chain. Both fee and amount will be subtracted form the
callers balance For now we only accept fee and asset having the same
MultiLocation
id.
If fee
is not high enough to cover for the execution costs in the
destination chain, then the assets will be trapped in the
destination chain
It’s a no-op if any error on local XCM execution or message sending. Note sending assets out per se doesn’t guarantee they would be received. Receiving depends on if the XCM message could be delivered by the network, and if the receiving chain would handle messages correctly.
Fields of transfer_multiasset_with_fee
asset: Box<VersionedMultiAsset>
fee: Box<VersionedMultiAsset>
dest: Box<VersionedMultiLocation>
dest_weight: Weight
Implementations
pub fn new_call_variant_transfer(
currency_id: T::CurrencyId,
amount: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
pub fn new_call_variant_transfer(
currency_id: T::CurrencyId,
amount: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
Create a call with the variant transfer
.
pub fn new_call_variant_transfer_multiasset(
asset: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
pub fn new_call_variant_transfer_multiasset(
asset: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
Create a call with the variant transfer_multiasset
.
pub fn new_call_variant_transfer_with_fee(
currency_id: T::CurrencyId,
amount: T::Balance,
fee: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
pub fn new_call_variant_transfer_with_fee(
currency_id: T::CurrencyId,
amount: T::Balance,
fee: T::Balance,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
Create a call with the variant transfer_with_fee
.
pub fn new_call_variant_transfer_multiasset_with_fee(
asset: Box<VersionedMultiAsset>,
fee: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
pub fn new_call_variant_transfer_multiasset_with_fee(
asset: Box<VersionedMultiAsset>,
fee: Box<VersionedMultiAsset>,
dest: Box<VersionedMultiLocation>,
dest_weight: Weight
) -> Self
Create a call with the variant transfer_multiasset_with_fee
.
Trait Implementations
Return the function name of the Call.
Return all function names.
Return a DispatchInfo
, containing relevant information of this dispatch. Read more
Dispatch this call but do not check the filter in origin.
Auto Trait Implementations
impl<T> RefUnwindSafe for Call<T> where
T: RefUnwindSafe,
<T as Config>::Balance: RefUnwindSafe,
<T as Config>::CurrencyId: RefUnwindSafe,
impl<T> Unpin for Call<T> where
T: Unpin,
<T as Config>::Balance: Unpin,
<T as Config>::CurrencyId: Unpin,
impl<T> UnwindSafe for Call<T> where
T: UnwindSafe,
<T as Config>::Balance: UnwindSafe,
<T as Config>::CurrencyId: UnwindSafe,
Blanket Implementations
Mutably borrows from an owned value. Read more
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
Compare self to key
and return true
if they are equal.
Causes self
to use its Binary
implementation when Debug
-formatted.
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
Mutably borrows self
and passes that borrow into the pipe function. Read more
Borrows self
, then passes self.borrow()
into the pipe function. Read more
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
Borrows self
, then passes self.as_ref()
into the pipe function.
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
Borrows self
, then passes self.deref()
into the pipe function.
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
The inverse inclusion map: attempts to construct self
from the equivalent element of its
superset. Read more
Checks if self
is actually part of its subset T
(and can be converted to it).
Use with care! Same as self.to_subset
but without any property checks. Always succeeds.
The inclusion map: converts self
to the equivalent element of its superset.
Immutable access to the Borrow<B>
of a value. Read more
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_deref()
only in debug builds, and is erased in release
builds. Read more
Provides immutable access to the reference for inspection.
Calls tap_ref
in debug builds, and does nothing in release builds.
Provides mutable access to the reference for modification.
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
Provides immutable access to the borrow for inspection. Read more
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.
The counterpart to unchecked_from
.
Consume self to return an equivalent value of T
.
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more