Enum pallet_staking::Call[][src]

pub enum Call<T: Config> {
Show 25 variants bond { controller: <T::Lookup as StaticLookup>::Source, value: BalanceOf<T>, payee: RewardDestination<T::AccountId>, }, bond_extra { max_additional: BalanceOf<T>, }, unbond { value: BalanceOf<T>, }, withdraw_unbonded { num_slashing_spans: u32, }, validate { prefs: ValidatorPrefs, }, nominate { targets: Vec<<T::Lookup as StaticLookup>::Source>, }, chill {}, set_payee { payee: RewardDestination<T::AccountId>, }, set_controller { controller: <T::Lookup as StaticLookup>::Source, }, set_validator_count { new: u32, }, increase_validator_count { additional: u32, }, scale_validator_count { factor: Percent, }, force_no_eras {}, force_new_era {}, set_invulnerables { invulnerables: Vec<T::AccountId>, }, force_unstake { stash: T::AccountId, num_slashing_spans: u32, }, force_new_era_always {}, cancel_deferred_slash { era: EraIndex, slash_indices: Vec<u32>, }, payout_stakers { validator_stash: T::AccountId, era: EraIndex, }, rebond { value: BalanceOf<T>, }, set_history_depth { new_history_depth: EraIndex, era_items_deleted: u32, }, reap_stash { stash: T::AccountId, num_slashing_spans: u32, }, kick { who: Vec<<T::Lookup as StaticLookup>::Source>, }, set_staking_limits { min_nominator_bond: BalanceOf<T>, min_validator_bond: BalanceOf<T>, max_nominator_count: Option<u32>, max_validator_count: Option<u32>, threshold: Option<Percent>, }, chill_other { controller: T::AccountId, }, // some variants omitted
}
Expand description

Contains one variant per dispatchable that can be called by an extrinsic.

Variants

bond

Take the origin account as a stash and lock up value of its balance. controller will be the account that controls it.

value must be more than the minimum_balance specified by T::Currency.

The dispatch origin for this call must be Signed by the stash account.

Emits Bonded.

NOTE: Two of the storage writes (Self::bonded, Self::payee) are never cleaned unless the origin falls below existential deposit and gets removed as dust.

Fields of bond

controller: <T::Lookup as StaticLookup>::Sourcevalue: BalanceOf<T>payee: RewardDestination<T::AccountId>
bond_extra

Add some extra amount that have appeared in the stash free_balance into the balance up for staking.

The dispatch origin for this call must be Signed by the stash, not the controller.

Use this if there are additional funds in your stash account that you wish to bond. Unlike bond or unbond this function does not impose any limitation on the amount that can be added.

Emits Bonded.

Fields of bond_extra

max_additional: BalanceOf<T>
unbond

Schedule a portion of the stash to be unlocked ready for transfer out after the bond period ends. If this leaves an amount actively bonded less than T::Currency::minimum_balance(), then it is increased to the full amount.

The dispatch origin for this call must be Signed by the controller, not the stash.

Once the unlock period is done, you can call withdraw_unbonded to actually move the funds out of management ready for transfer.

No more than a limited number of unlocking chunks (see MAX_UNLOCKING_CHUNKS) can co-exists at the same time. In that case, Call::withdraw_unbonded need to be called first to remove some of the chunks (if possible).

If a user encounters the InsufficientBond error when calling this extrinsic, they should call chill first in order to free up their bonded funds.

Emits Unbonded.

See also Call::withdraw_unbonded.

Fields of unbond

value: BalanceOf<T>
withdraw_unbonded

Remove any unlocked chunks from the unlocking queue from our management.

This essentially frees up that balance to be used by the stash account to do whatever it wants.

The dispatch origin for this call must be Signed by the controller.

Emits Withdrawn.

See also Call::unbond.

Complexity O(S) where S is the number of slashing spans to remove NOTE: Weight annotation is the kill scenario, we refund otherwise.

Fields of withdraw_unbonded

num_slashing_spans: u32
validate

Declare the desire to validate for the origin controller.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the controller, not the stash.

Fields of validate

prefs: ValidatorPrefs
nominate

Declare the desire to nominate targets for the origin controller.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the controller, not the stash.

Fields of nominate

targets: Vec<<T::Lookup as StaticLookup>::Source>
chill

Declare no desire to either validate or nominate.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the controller, not the stash.

Fields of chill

set_payee

(Re-)set the payment target for a controller.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the controller, not the stash.


Fields of set_payee

payee: RewardDestination<T::AccountId>
set_controller

(Re-)set the controller of a stash.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the stash, not the controller.


Weight: O(1) DB Weight:

Fields of set_controller

controller: <T::Lookup as StaticLookup>::Source
set_validator_count

Sets the ideal number of validators.

The dispatch origin must be Root.

Weight: O(1) Write: Validator Count

Fields of set_validator_count

new: u32
increase_validator_count

Increments the ideal number of validators.

The dispatch origin must be Root.

Same as Self::set_validator_count.

Fields of increase_validator_count

additional: u32
scale_validator_count

Scale up the ideal number of validators by a factor.

The dispatch origin must be Root.

Same as Self::set_validator_count.

Fields of scale_validator_count

factor: Percent
force_no_eras

Force there to be no new eras indefinitely.

The dispatch origin must be Root.

Warning

The election process starts multiple blocks before the end of the era. Thus the election process may be ongoing when this is called. In this case the election will continue until the next era is triggered.

Fields of force_no_eras

force_new_era

Force there to be a new era at the end of the next session. After this, it will be reset to normal (non-forced) behaviour.

The dispatch origin must be Root.

Warning

The election process starts multiple blocks before the end of the era. If this is called just before a new era is triggered, the election process may not have enough blocks to get a result.

Fields of force_new_era

set_invulnerables

Set the validators who cannot be slashed (if any).

The dispatch origin must be Root.

Fields of set_invulnerables

invulnerables: Vec<T::AccountId>
force_unstake

Force a current staker to become completely unstaked, immediately.

The dispatch origin must be Root.

O(S) where S is the number of slashing spans to be removed Reads: Bonded, Slashing Spans, Account, Locks Writes: Bonded, Slashing Spans (if S > 0), Ledger, Payee, Validators, Nominators, Account, Locks Writes Each: SpanSlash * S

Fields of force_unstake

stash: T::AccountIdnum_slashing_spans: u32
force_new_era_always

Force there to be a new era at the end of sessions indefinitely.

The dispatch origin must be Root.

Warning

The election process starts multiple blocks before the end of the era. If this is called just before a new era is triggered, the election process may not have enough blocks to get a result.

Fields of force_new_era_always

cancel_deferred_slash

Cancel enactment of a deferred slash.

Can be called by the T::SlashCancelOrigin.

Parameters: era and indices of the slashes for that era to kill.

Complexity: O(U + S) with U unapplied slashes weighted with U=1000 and S is the number of slash indices to be canceled.

Fields of cancel_deferred_slash

era: EraIndexslash_indices: Vec<u32>
payout_stakers

Pay out all the stakers behind a single validator for a single era.

The origin of this call must be Signed. Any account can call this function, even if it is not one of the stakers.


N is the Number of payouts for the validator (including the validator) Weight:

Fields of payout_stakers

validator_stash: T::AccountIdera: EraIndex
rebond

Rebond a portion of the stash scheduled to be unlocked.

The dispatch origin must be signed by the controller.

Fields of rebond

value: BalanceOf<T>
set_history_depth

Set HistoryDepth value. This function will delete any history information when HistoryDepth is reduced.

Parameters:

Origin must be root.

Fields of set_history_depth

new_history_depth: EraIndexera_items_deleted: u32
reap_stash

Remove all data structures concerning a staker/stash once it is at a state where it can be considered dust in the staking system. The requirements are:

  1. the total_balance of the stash is below existential deposit.
  2. or, the ledger.total of the stash is below existential deposit.

The former can happen in cases like a slash; the latter when a fully unbonded account is still receiving staking rewards in RewardDestination::Staked.

It can be called by anyone, as long as stash meets the above requirements.

Refunds the transaction fees upon successful execution.

Fields of reap_stash

stash: T::AccountIdnum_slashing_spans: u32
kick

Remove the given nominations from the calling validator.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed by the controller, not the stash.

Note: Making this call only makes sense if you first set the validator preferences to block any further nominations.

Fields of kick

who: Vec<<T::Lookup as StaticLookup>::Source>
set_staking_limits

Update the various staking limits this pallet.

Origin must be Root to call this function.

NOTE: Existing nominators and validators will not be affected by this update. to kick people under the new limits, chill_other should be called.

Fields of set_staking_limits

min_nominator_bond: BalanceOf<T>min_validator_bond: BalanceOf<T>max_nominator_count: Option<u32>max_validator_count: Option<u32>threshold: Option<Percent>
chill_other

Declare a controller to stop participating as either a validator or nominator.

Effects will be felt at the beginning of the next era.

The dispatch origin for this call must be Signed, but can be called by anyone.

If the caller is the same as the controller being targeted, then no further checks are enforced, and this function behaves just like chill.

If the caller is different than the controller being targeted, the following conditions must be met:

This can be helpful if bond requirements are updated, and we need to remove old users who do not satisfy these requirements.

Fields of chill_other

controller: T::AccountId

Implementations

Create a call with the variant bond.

Create a call with the variant bond_extra.

Create a call with the variant unbond.

Create a call with the variant withdraw_unbonded.

Create a call with the variant validate.

Create a call with the variant nominate.

Create a call with the variant chill.

Create a call with the variant set_payee.

Create a call with the variant set_controller.

Create a call with the variant set_validator_count.

Create a call with the variant increase_validator_count.

Create a call with the variant scale_validator_count.

Create a call with the variant force_no_eras.

Create a call with the variant force_new_era.

Create a call with the variant set_invulnerables.

Create a call with the variant force_unstake.

Create a call with the variant force_new_era_always.

Create a call with the variant cancel_deferred_slash.

Create a call with the variant payout_stakers.

Create a call with the variant rebond.

Create a call with the variant set_history_depth.

Create a call with the variant reap_stash.

Create a call with the variant kick.

Create a call with the variant set_staking_limits.

Create a call with the variant chill_other.

Trait Implementations

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Attempt to deserialise the value from input.

Attempt to skip the encoded value from input. Read more

Returns the fixed encoded size of the type. Read more

Convert self to a slice and append it to the destination.

If possible give a hint of expected size of the encoding. Read more

Convert self to an owned vector.

Convert self to a slice and then invoke the given closure with it.

Calculates the encoded size. Read more

Return the function name of the Call.

Return all function names.

Return a DispatchInfo, containing relevant information of this dispatch. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

The type identifying for which type info is provided. Read more

Returns the static type identifier for Self.

The origin type of the runtime, (i.e. frame_system::Config::Origin).

Dispatch this call but do not check the filter in origin.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Convert from a value of T into an equivalent instance of Option<Self>. Read more

Consume self to return Some equivalent value of Option<T>. Read more

Converts self into T using Into<T>. Read more

Converts self into a target type. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and advance input by the number of bytes consumed. Read more

Decode Self with the given maximum recursion depth. Read more

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

Compare self to key and return true if they are equal.

Causes self to use its Binary implementation when Debug-formatted.

Causes self to use its Display implementation when Debug-formatted. Read more

Causes self to use its LowerExp implementation when Debug-formatted. Read more

Causes self to use its LowerHex implementation when Debug-formatted. Read more

Causes self to use its Octal implementation when Debug-formatted.

Causes self to use its Pointer implementation when Debug-formatted. Read more

Causes self to use its UpperExp implementation when Debug-formatted. Read more

Causes self to use its UpperHex implementation when Debug-formatted. Read more

Performs the conversion.

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Performs the conversion.

Cast reference.

Cast reference.

Cast mutable reference.

Cast mutable reference.

Get a reference to the inner from the outer.

Get a mutable reference to the inner from the outer.

Return an encoding of Self prepended by given slice.

Pipes by value. This is generally the method you want to use. Read more

Borrows self and passes that borrow into the pipe function. Read more

Mutably borrows self and passes that borrow into the pipe function. Read more

Borrows self, then passes self.borrow() into the pipe function. Read more

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

Borrows self, then passes self.as_ref() into the pipe function.

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

Borrows self, then passes self.deref() into the pipe function.

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

Should always be Self

Convert from a value of T into an equivalent instance of Self. Read more

Consume self to return an equivalent value of T. Read more

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more

Checks if self is actually part of its subset T (and can be converted to it).

Use with care! Same as self.to_subset but without any property checks. Always succeeds.

The inclusion map: converts self to the equivalent element of its superset.

Immutable access to a value. Read more

Mutable access to a value. Read more

Immutable access to the Borrow<B> of a value. Read more

Mutable access to the BorrowMut<B> of a value. Read more

Immutable access to the AsRef<R> view of a value. Read more

Mutable access to the AsMut<R> view of a value. Read more

Immutable access to the Deref::Target of a value. Read more

Mutable access to the Deref::Target of a value. Read more

Calls .tap() only in debug builds, and is erased in release builds.

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

Provides immutable access for inspection. Read more

Calls tap in debug builds, and does nothing in release builds.

Provides mutable access for modification. Read more

Calls tap_mut in debug builds, and does nothing in release builds.

Provides immutable access to the reference for inspection.

Calls tap_ref in debug builds, and does nothing in release builds.

Provides mutable access to the reference for modification.

Calls tap_ref_mut in debug builds, and does nothing in release builds.

Provides immutable access to the borrow for inspection. Read more

Calls tap_borrow in debug builds, and does nothing in release builds.

Provides mutable access to the borrow for modification.

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

Immutably dereferences self for inspection.

Calls tap_deref in debug builds, and does nothing in release builds.

Mutably dereferences self for modification.

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

Attempts to convert self into T using TryInto<T>. Read more

Attempts to convert self into a target type. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The counterpart to unchecked_from.

Consume self to return an equivalent value of T.

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more